|
| Supplier:
Garlock Sealing Technologies
This
manufacturer's Garlock Metallic Gaskets division
has introduced some of the industry's most innovative
production methods and products. Johnson Packings
provides a full selection of these highly-reliable
gaskets.
Spiral
Wound Gaskets
| • |
Manufactured
in accordance with ASME B16.20 |
| • |
Made
with an alternating combination of formed
metal wire and soft filler materials |
| • |
Form
a very effective seal when compressed between
two flanges |
| • |
Filler
and wire material can be changed to accommodate
different chemical compatibility requirements |
| • |
Resiliency
and strength for a variety of conditions and
applications |
| • |
Excellent
for refineries, chemical processing plants,
power generation, aerospace and a variety
of other applications |
|
 |
|
| |
|
 |
CONTROLLED
DENSITY™ Gaskets
Computerized
manufacturing process ensures optimum filler density
is constant across gasket winding for consistent
compression and superior sealability
| • |
High
tightness level achieved with minimal compressive
load, for longer-lasting seal |
| • |
Tight
tolerance on gasket ID and OD ensures a reliable
seal |
|
|
| |
|
The
Garlock EDGE™
| • |
STABL-LOCK™
inner wrap construction prevents sealing element
from flowing into and contaminating process
stream |
| • |
CONTROLLED
DENSITY™ winding prevents bolt torque
loss and requires less compressive force to
seal |
| • |
Retaining
groove grips winding firmly, maintaining symmetrical
cross-section for most effective seal |
| • |
Modified
guide ring ensures contact with all raised
face surfaces |
| • |
Dual
flange design accommodates both 150 and 300
lb. flanges — reduces inventory costs |
| • |
Wide
variety of metallic and filler materials with
a full range of temperature capabilities |
|
 |
 |
|
|
API
Ring Joint
Corrugated
Heat
Exchanger
Single/Double
Jacketed
Specials |
|
 |
Pre-Cut
Shims/Custom Shims
Supplier:
Aloma Shim and Manufacturing
Pre-cut
shims protect equipment from misalignment, downtime
and resulting damage. All Aloma pre-cut shims
are free of burrs for safety.
| • |
Accurate
shim thickness without measuring with a micrometer |
| • |
Hold
the closest tolerances in the industry for
both thickness and flatness |
| • |
Manufactured
from 304 stainless steel for added corrosion
resistance |
| • |
Slot
sizes are 1/16" oversize to provide proper
bolt clearance |
| • |
Permanently
etched in inches and millimeters |
| • |
"Trailer
Hitch" tab design provides safe handling |
| • |
Eliminate
shim stock material waste and reduce alignment
labor costs |
|
| Standard
Pre-Cut Shim Options |
| Shim
Size |
Maximum
Bolt Size |
Slot
Size |
Shim
Dimensions |
| AA |
3/8" |
7/16" |
1-1/2"
x 1-1/2" |
| A |
1/2" |
9/16" |
2"
x 2" |
| BB |
5/8" |
11/16" |
2-1/2"
x 2-1/2" |
| B |
3/4" |
13/16" |
3"
x 3" |
| C |
1-1/8" |
1-3/16" |
4"
x 4" |
| D |
1-1/2" |
1-9/16" |
5"
x 5" |
| E |
1-7/8" |
1-15/16" |
6"
x 6" |
| G |
2-1/4" |
2-5/16" |
6"
x 6" |
| H |
2-1/4" |
2-5/16" |
8"
x 8" |
|
| |
| ALOMA
Tolerance Standards |
| Shim
Size |
ALOMA
Tolerance |
AISI
Tolerance |
| 0.050 |
0.050
± 0.002 |
18
GA 0.048 ± 0.003 (typical 0.046) |
| 0.075 |
0.075
± 0.002 |
14
GA 0.072 ± 0.003 (typical 0.071) |
| 0.100 |
0.100
± 0.004 |
12
GA 0.105 ± 0.005 (typical 0.102) |
| 0.125 |
0.125
± 0.004 |
11
GA 0.119 ± 0.005 (typical 0.117) |
|
|
| |
|
|
|
| |
|
| |
| CONTACT
US |
| 24-Hour
Emergency Service: 1-800-356-0061 |
Email: infohnsonpackings.com |
| Headquarters:
|
21 Deer
Park Drive, P.O. Box 545, East Longmeadow, MA 01028 | 413-525-5555
| Fax: 413-525-5520 |
| Branch
Office: |
1185 Hammond
Street, Unit 4, Bangor, ME 04401 | 207-262-7110 | Fax: 207-262-7118 |
|
|
