|
Clipper
Oil Seals
Supplier:
JM Clipper
Unique
non-metallic construction offers benefits over metal-cased
seals throughout the life of the seal. These seals are
available in sizes to fit most industrial applications.
| Aramid
fiber-reinforced composite |
| • |
fits
a wider range of bore tolerances and finishes, for
lower machining costs and easier installation |
| • |
resists
corrosion |
| • |
takes
more abuse, eliminating damage |
| |
|
| Integrally-molded
unit |
| • |
gives
better I.D. to O.D. concentricity, resulting in
less potential leakage and shaft wear |
| |
|
| Stainless
steel garter spring |
| • |
provides
more uniform lip load |
| • |
resists
corrosion |
| |
|
| Specially-formulated
elastomer lip with designed flexibility |
| • |
minimizes
friction, reducing shaft wear |
| • |
follows
shaft eccentricity |
|
|
 |
Shaft
Seals for Pressure Service
Supplier:
JM Clipper
These
Shaft Seals prevent the excessive wear and heat
buildup at the shaft often caused by internal
pressure.
| • |
Economical
seals are reliable at pressures up to 300
psi |
| • |
Built
with touch fluoroelastomer sealing element,
strong metal case and large, pressure-activated
PTFE anti-friction element |
| • |
Can
be used in a broad range of equipment, in
rotary or reciprocating motion |
|
|
|
Model
26 Klozure® Oil Seals
Supplier: Garlock
These
rugged performers are designed to handle tough applications
where more positive sealing is crucial. Their unique
design features make them the industry standard.
| • |
Springs
won't fall out or trap contaminants |
| • |
No
lip rollover on installation |
| • |
Non-corrosive
construction |
| • |
No
cover plate required |
| • |
Choice
of element materials - standard nitrile for temperatures
to 250° F; optional fluoroelastomer for temperatures
to 400° F and resistance to wide range of chemicals;
new MILL-RIGHT for temperatures to 350° F and
high abrasion resistance |
| • |
Handles
high shaft misalignment and runout |
| • |
Shaft
sizes for 7/8" to 60" (metric sizes from
25mm to 1524mm) |
| • |
Available
in split configuration |
|
|
Radyne™
Seals
Supplier: JM Clipper's
Redmond Plastics Division
Radyne
Rotary Shaft Seals and Spring Energized Seals are fabricated
from PTFE-based materials.
| • |
Virtually
unlimited chemical compatibility |
| • |
Minimal
breakaway and running friction |
| • |
Self-lubricating,
dry running |
| • |
Kind
to soft dynamic surfaces |
| • |
Long-wearing
materials increase seal life |
| • |
Minimal
temperature increase from friction |
|
|
Speedi-Sleeve®
Shaft Repair Kits
Supplier: CR Industries
With
the use of a CR Speedi-Sleeve, a seal-worn shaft can
be better than new in minutes.
| • |
Slips
over the worn section of the shaft and instantly
creates a new sealing surface |
| • |
Made
from high-quality stainless steel |
| • |
So
thin that it clings to the shaft so snugly that
the original seal size doesn't change |
|
| |
|
|
|
| |
|
| |
| CONTACT
US |
| 24-Hour
Emergency Service: 1-800-356-0061 |
Email: infohnsonpackings.com |
| Headquarters:
|
21 Deer
Park Drive, P.O. Box 545, East Longmeadow, MA 01028 | 413-525-5555
| Fax: 413-525-5520 |
| Branch
Office: |
1185 Hammond
Street, Unit 4, Bangor, ME 04401 | 207-262-7110 | Fax: 207-262-7118 |
|
|
